REF: BF0003

Alpha Horizontal Standard Load Out Bag

€75.00

Not rated yet  Write a review

The Infinity Alpha Bag is made with a hard-plastic inner shell to help protect your valuable models inside.  It is covered by a black canvas material with the Infinity logo embroidered on the front pocket. 

The large pockets on the front and back of the bag are big enough to hold two of the Infinity rule books.  There are pockets on both side that will fit large templates, dice, tokens and other accessories.  A pocket is available on the back and on the inside of the bag for any paperwork you may want to carry.  

Lastly, you have the main foam area.  The Infinity Alpha bag will hold 13 inches (330 mm) of foam when loaded horizontally inside the bag.  With this load out option, you will receive the following six foam trays: 
 

  • 2x 1 inch (25 mm) thick tray with 16x 1 x 1 1/2 inch (25 x 38 mm) cut outs, 7x 2 1/4 x 1 inch (57 x 25 mm) cut outs, 2x 2 1/4 x 1 1/2 inch (57 x 38 mm) and 1x 2 3/4 x 2 1/4 inch (70 x 57 mm) cut outs.
  • 2x 1.5 inch (38 mm) thick tray with 16x 1 x 1 1/2 inch (25 x 38 mm) cut outs, 7x 2 1/4 x 1 inch (57 x 25 mm) cut outs, 2x 2 1/4 x 1 1/2 inch (57 x 38 mm) and 1x 2 3/4 x 2 1/4 inch (70 x 57 mm) cut outs.
  • 1x 2 inch (50 mm) thick tray with 16x 1 x 1 1/2 inch (25 x 38 mm) cut outs, 7x 2 1/4 x 1 inch (57 x 25 mm) cut outs, 2x 2 1/4 x 1 1/2 inch (57 x 38 mm) and 1x 2 3/4 x 2 1/4 inch (70 x 57 mm) cut outs.
  • 1x 3 Inch Pluck Foam Tray
  • 4x Foam Toppers

Box contains:



  • This product is not a toy.  Not intended for use of persons 14 years of age or younger.
  • Miniatures included in our products are provided unpainted. Assembly may also be required. Actual components may vary from those shown.
Safe & secure shopping

People Who Viewed This Also Viewed

Share your minis with us

Share your minis with us in Instagram, label it whit the hashtag #CorvusBelli and see your mini here!